FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8N, 9N, 2N Tractor Engine Parts

[ Return ]

Click here to see parts by model

Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 8N, 9N, 2N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Item #: 131643, Ref. 8N6546B) $246.00

Governor - Complete Governor Assembly with gasket, 3 arm, for 9N and 2N (1939-1947), without proofmeter drive. (Item #: 105388, Ref. 9N18200C) $214.00

Governor - This Two arm type Governor Assembly with gasket. Will not replace 3 arm, ensure your old governor is 2 arm type. (Item #: 105389, Ref. 8N18204B) $283.75

$photo of For 8N, 9N, 2N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5\8 inch).$
Governor Repair Kit, Basic - For 8N, 9N, 2N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5\8 inch). (Item #: 178658, Ref. BOK12502) $161.00

$photo of For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5\8 inch), bushings, mounting gasket, dust seal, C-clip.$
Governor Repair Kit, Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5\8 inch), bushings, mounting gasket, dust seal, C-clip. (Item #: 105392, Ref. CAPN12502A) $356.44

Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref. 9N6384) $25.50

$photo of This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1\4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354.$
Crankshaft Pulley - This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1\4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354. (Item #: 108783, Ref. 192160) $44.90

Timing Gear, Camshaft - This Bolt-on type Aluminum Camshafts fits 8N, 9N, 2N thru 1952. (Item #: 121560, Ref. 7RA6256) $91.00

Governor Centrifugal Assembly - Governor Internal Centrifugal Assembly. Fits 9N18200C or 8N18204B above, for 8N, 9N, 2N (1939 thru 1952). If your tractor has the proofmeter you will need to also purchase a roll pin at a local hardware store (0.314 O.D. x 0.750 Long) to drive the cable. (Item #: 105391, Ref. 9N8N18179CA) $161.00

Governor Housing - Governor Housing includes needle bearing, lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 8N, 9N, 2N tractors built 1939 thru 1952. (Item #: 179209, Ref. 8N18085) $232.00

No
Picture
Pistons and Sleeves - Pistons and Sleeves are located in the Pistons and Sleeves category Use your BACK key and select this category. (Item #: Various) $107.00

Timing Gear, Crankshaft - This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Item #: 121562, Ref. 486306A) $49.80

Valve Tappet - ADJUSTABLE Tappet. Fits 8N, 9N, 2N. Note: Quantity 8 used in engine. Priced each. If you order 1, you will receive 1 tappet. (Item #: 128660, Ref. A0NN6500A) $17.00

Cylinder Head - For 8N, 9N, 2N. All GAS 1939-1952. Cylinder Head. Replaces 8N6050, 8N6050A, 9N6050 (Item #: 121814, Ref. 8N6050A) $220.00

Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. Wrenches to adjust 91A tappets. Replaces 8WR1770, 8WR1770, T-6500-PR. Also used on Ford F-Series Trucks 1948-1953 and Ford Cars 1949-1951. (Item #: 113941, Ref. 8WR1770) $14.50

Camshaft Kit, Side Mount Distributor Engine - This camshaft uses a bolt on style camshaft gear. This kit includes: Camshaft with Distributor Gear and Lifters. For 8N with Side Mount Distributor (Item #: 184795, Ref. R0885K) $346.00

Crankshaft - For tractor models 9N, 8N, 2N. Does not include bearings. (Item #: 100549, Ref. 9N6303A) $455.00

Governor Shaft - Shaft Assembly, with or without proofmeter. For 8N, 9N, 2N. (Item #: 179265, Ref. 9N8N18187A) $78.00

Valve Service Kit - Contains: 8 valve springs, 8 valve guides-solid type and 16 valve locks. For 8N, 9N, 2N. (Item #: 184398, Ref. VSKF928N) $135.00

Valve Rotator Assembly - Valve Rotator Kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves. 4 used per engine. (Item #: 178973, Ref. 8N6534B) $13.30

Valve, Exhaust, Free-rotating - Exhaust Valve for free-rotating type. Uses solid guide and EAM6518A lock. For tractor models 8N, 9N, 2N. (Item #: 108115, Ref. 8N6505C) $14.00

Valve, Intake - This Intake Valve uses the one piece guide. Uses valve lock part number 7HA6518. For 8N, 9N, 2N. (Item #: 128658, Ref. 8BA6507A) $10.80

Valve, Exhaust - Exhaust Valve using Solid Guide. Uses 7HA6518 lock. For tractor models 8N, 9N, 2N. (Item #: 128615, Ref. 8N6505A) $11.50

Governor Needle Bearing - For tractor models 8N, 9N, 2N. (Item #: 179092, Ref. 9N18182) $10.90

Governor Dust Seal - Replacement Governor Dust Seal. For tractor models 8N, 9N, 2N. (Item #: 169249, Ref. 9N18183) $8.50

Governor Lower Race Assembly Bearing - For tractor models 8N, 9N, 2N. (Item #: 179090, Ref. 9N18186B) $96.00

Governor Upper Race Assembly - Upper Race Assembly. For 8N, 9N, 2N. Replaces original part number 9N18188B. (Item #: 179423, Ref. 9N18188B) $80.00

Camshaft - Fits 8N serial number 263843 and greater using SIDE Mount Distributor. (Item #: 160974, Ref. 8N6250) $194.00

Valve Guide - Single Valve Guide. For 8N, 9N, 2N. (Item #: 108113, Ref. 8BA6510B) $6.00

$photo of Sold per 1\2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234.$
Valve Key, Intake and Exhaust, 1\2 - Sold per 1\2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Item #: 107088, Ref. 7HA6518) $0.60

Valve Spring with Split Guides - Sold individually, these valve springs are for120 CID 4 cylinder gas engine. Valve spring for use with split guides. For 8N, 9N, 2N. (Item #: 172904, Ref. 2NC6513) $2.20

Valve Key, Rotating Exhaust - Single valve key. 120 CID 4 cylinder gas engine. Valve Key for FREE ROTATING Exhaust Valves. For tractor models 8N, 9N, 2N. (Item #: 166558, Ref. EAM6518A) $2.40

Valve Guide Retainer - 120 CID 4 cylinder gas engines. For 8N, 9N, 2N. Sold individually. 8 used per engine. (Item #: 178042, Ref. 40-6512) $1.50

Valve Spring Retainer - These Valve Spring Retainers are for intake and exhaust for the 120 cubic inch, 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 retainer. Replace 8RT6514B 8 per engine. (Item #: 108114, Ref. 8BA6514) $3.10

Valve Stem Seal - Valve Stem Seal for valve guide in 120 CID 4 cylinder gas engine. For 8N, 9N, 2N. Priced each. 4 used per tractor. (Item #: 166703, Ref. 8BA6571) $0.60

Valve Spring with 1 Piece Guides - Sold individually, this valve spring is for the 120 CID 4 cylinder gas engine in the 9N, 2N and 8N. For use with Solid Valve Guides. (Item #: 172904, Ref. 8N6513) $2.20

No
Picture
Distributors and Distributor Parts - These are located in the Electrical System parts section. (Item #: DISTRIBUTORS) $0.00

No
Picture
Piston Rings - These are located in the ENGINE RINGS category. (Item #: ENGINE-RINGS) $0.00

Governor Compensating Spring - 4.95 inches in length. For model 8N. (Item #: 178054, Ref. 8N9827) $8.00

Governor Compensating Spring - 3.7 inch length. For tractor models 9N, 2N. (Item #: 178032, Ref. 9N9827) $6.90

$photo of This crankshaft pulley is for models 8N, 9N, 2N tractors. Used with a pin style hub, supplied with four rubber bushings for hubs with 13\32 pins when being used with Front Mounted Hydraulic Pump.$
Crankshaft Pulley - This crankshaft pulley is for models 8N, 9N, 2N tractors. Used with a pin style hub, supplied with four rubber bushings for hubs with 13\32 pins when being used with Front Mounted Hydraulic Pump. (Item #: 172929, Ref. 192152) $86.00

Governor Lever Spring - This Governor Lever Spring will fit tractor models 9N, 2N, 8N. (Item #: 178196, Ref. 9N18196) $9.00

Valve Seat, Intake - For tractor models 8N, 9N, 2N. (Item #: 184249, Ref. 218-7535) $3.30

Valve Seat, Exhaust - These Valve Seats are the Nickel Series which are made for all new fuel blends. For tractor models 8N, 9N, 2N. 1.348 inch outside diameter. (Item #: 178189, Ref. 218-7405) $12.80

$photo of Studs are 7\16 in diameter and 3 inches long (threads: coarse 7\16-14 fine 7\16-20). For 8N, 9N, 2N. 18 are used per tractor. Priced each.$
Cylinder Head Stud - Studs are 7\16 in diameter and 3 inches long (threads: coarse 7\16-14 fine 7\16-20). For 8N, 9N, 2N. 18 are used per tractor. Priced each. (Item #: 182477, Ref. 8N6065A) $7.60

Hand Starting Crank - 8N, 9N, 2N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Item #: 111921, Ref. 351010R31) $46.50

Governor Plate - Plate, Governor Compensating Spring Anchor Plate. For tractor model 8N (1948-1952). (Item #: 178064, Ref. 8N9855) $4.90

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref. 7HA-6212) $1.70

Crankshaft Cranking Ratchet - The ratchet nut fits into the nose of the crankshaft. The hand crank fits into the end of the ratchet to turn the engine over. Replaces original part number 2N6319A1 (Item #: 182475, Ref. 2N6319A1) $17.20

Camshaft Gear - This Press on type Camshaft Gear is used on Ford Tractors 1939-1942. THIS IS A FIBER GEAR. Replaces 48-6256-A, 486256A. (Item #: 183022, Ref. 48-6256-A) $20.90

Governor Thrust Bearing - This Governor Thrust Bearing is used on Ford 9N, 2N and 8N tractors, 1939-1952. It replaces original part number 9N18192 (Item #: 179808, Ref. 9N18192) $7.30

Valve Guide, Split - Set of 16 halves. This is the original Split, two piece guide used with the mushroomed top valves, Ford 9N and 2N 1939-1947. Also used on Ford Cars and Trucks 1932-1948. Replace 40-6510-S, 406510. (Item #: 183688, Ref. 40-6510-S) $139.00

$photo of These bolts are 7\16 in diameter and 3 inches long. For 8N, 9N, 2N. 18 are used per tractor. Replaces 8N6065A$
Cylinder Head Bolt - These bolts are 7\16 in diameter and 3 inches long. For 8N, 9N, 2N. 18 are used per tractor. Replaces 8N6065A (Item #: 135049, Ref. F8N6065A) $9.40

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref. 350645S) $28.30

$photo of <UL> <li>For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000<\li> <li>Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B<\li> <li>For OEM Quality use Item #: 183734<\li> <\UL>$
Connecting Rod Nut - For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B For OEM Quality use Item #: 183734 (Item #: 182466) $1.10

No
Picture
Transmission Countershaft, Used - For Ford tractor model 8NReplaces Ford OEM number 8N7111For a new version of this item use Item #: 108538Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435404) $79.01

$photo of <UL><li>For Ford tractor models 8N, 9N<\li><li>Replaces Ford OEM nos 9N6200B<\li><li>Replaces Ford Casting nos 9N6205B<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Connecting Rod, Used - For Ford tractor models 8N, 9NReplaces Ford OEM nos 9N6200BReplaces Ford Casting nos 9N6205BUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 445287) $29.01

$photo of <UL><li>For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131<\li><li>Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140<\li><li>Replaces Ford OEM nos 8N7110<\li><li>4th Gear<\li><li>Teeth: 39<\li><li>Splines: 17<\li><li>Inside Diameter: 1.783 <\li><li>Outside Diameter: 5.119 <\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Main Shaft Gear, Used - For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140Replaces Ford OEM nos 8N71104th GearTeeth: 39Splines: 17Inside Diameter: 1.783 Outside Diameter: 5.119 Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 436813) $117.01

Search Parts for:

Category:

In:

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy